Mo. Code Regs. tit. 20 § 2030-2.050

Current through Register Vol. 49, No. 9, May 1, 2024

Section 20 CSR 2030-2.050 - Title Block

PURPOSE: This rule clarifies the identity of the client and entity preparing and sealing all architectural, engineering, land surveying, and/or landscape architectural documents.

(1) An architectural, engineering, land surveying, or landscape architectural entity shall incorporate a title block on all drawings, exhibits, plans, plats, maps, and surveys that are required to be signed and sealed by Chapter 327, RSMo, and these regulations.

(2) The title block must, at a minimum, contain the following information:

(A) The name of the licensee either as a sole proprietor, partnership, corporation, limited liability company, or other appropriate entity;

(B) The licensee's address and phone number;

(C) Name or identification of project;

(D) Address/location of project (city/county and state);

(E) Date prepared;

(F) Space for the licensee's signature, date, and seal;

(G) The printed name, discipline, and license number of the person sealing the document; and

(H) The printed name, discipline, and certificate of authority number of the corporation as defined in section 327.011, RSMo.

20 CSR 2030-2.050

AUTHORITY: sections 327.041 and 327.411, RSMo Supp. 2013.* Original rule filed June 14, 2007, effective Dec. 30, 2007. Amended: Filed Nov. 1, 2011, effective May 30, 2012. Amended: Filed Aug. 8, 2013, effective Feb. 28, 2014.

*Original authority: 327.041, RSMo 1969, amended 1981, 1986, 1989, 1993, 1995, 1999, 2001, 2010 and 327.411, RSMo 1969, amended 1999, 2003, 2010.